Good in shed...

So my holiday time was spent (and I'm still spending or rather projecting spending...) building a shed for the bikes:







Winging it takes time, but then I fly by the seat of my pants so hold on!
Thanks to Mag the Tool Gal, a master of the pun and tape measure...

------------

Update, for Doohickie who asked for a DIY, here's some links to the sites that I got my design (mostly) from.

http://www.homeenvy.com/db/6/86.html

http://www.southernpine.com/diyplans.shtml

Basically I came up with my own dimensions based on what I thought I'd need for 3-4 bikes by simply placing them on a tile floor and counting the tiles. I left out the front brace to facilitate easy bike entry (but makes squaring up the frame rather difficult).

When trucking lumber home in an Elantra Hatchback, 2x4's and such can slide in fine and may stick out. But plywood is another matter. I had to have it all cut up to suit both the shed and what will fit into the car. It was a bit of a pain but it all worked. I did have to go back in with a couple of pieces to have them cut again...

Measure 5 times and cut once... okay twice, but make the first cut on the other side of the line.